30-09-2021, 17:45
Hi,
1- This seems something related to your LAN. I'm afraid I can't help much here. Check your firewall setting and make sure that it isn't blocking OTA upload tool.
2 - Regarding the LEDs, here is an explanation of their functions:
LED1 - Think on it as a power ON LED. You can set it to be always ON since power is applied, or have it doing a Fade IN Fade Out effect. For those who run the device without the OLED display, this will provide a quick way to see that the device is running.
LED2 - This LED will blink every time a data packet is transmitted via RF (LoRa or OOK). Those who are using the WiFi mode only, may not install LED2.
1- This seems something related to your LAN. I'm afraid I can't help much here. Check your firewall setting and make sure that it isn't blocking OTA upload tool.
2 - Regarding the LEDs, here is an explanation of their functions:
LED1 - Think on it as a power ON LED. You can set it to be always ON since power is applied, or have it doing a Fade IN Fade Out effect. For those who run the device without the OLED display, this will provide a quick way to see that the device is running.
LED2 - This LED will blink every time a data packet is transmitted via RF (LoRa or OOK). Those who are using the WiFi mode only, may not install LED2.