[werk_ag]

Hi again , good to know that you could fix it easily. I think I told you already in a post , that when I had the battery issue and The big clock timer was set to 15 mins , the gathering data was passing that time and couldn’t know if all sensors were connected or not cause the big clock was activated after 15 mins .

Hi xxDvDxx,

That's why I did the change referred on my last post. I take in account every user report as it usually counts to improve the system. Once again, thank you

...
For what I could see everything else was working good , the RF link didn’t take too much ( after that battery issue I had with rain gauge ) , 1or 2 minutes , not much.

That is a very good timings for an Auriol system, and means you have a good reception. Auriol stations usually only send Temp / Hum data at near 1m30s intervals. To pass the initialization process the system needs to receive at least two Temp / Hum data packets, so seems that your system is running quite well.

Regards and keep well.
Werk_AG