Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

New WeatherDuino installation in Italy
#8

(02-11-2020, 18:41)bombenm Wrote:  Hello to everyone,
 I have finally finished building my weather station. Everything works perfectly but I still don't understand why the receiver shows a red dot in the center. The three dots should all be green as they receive from the three TWR sensors and the software is updated to the latest version, correct? I am sending you some photos of the new weather station. The address is: www.wunderground.com/dashboard/pws/IFRIULIV68/graph/2020-11-2/2020-11-2/daily
Any improvements or ideas are welcome. Thank you.


EDITED: New resized pictures some posts bellow.


Hi, i have same issue   cheers
Reply


Messages In This Thread
New WeatherDuino installation in Italy - by bombenm - 02-11-2020, 18:41
RE: New WeatherDuino installation in Italy - by hornychz - 04-11-2020, 17:28
RE: New WeatherDuino installation in Italy - by uncle_bob - 06-11-2020, 11:42
RE: New WeatherDuino installation in Italy - by xxDvDxx - 08-12-2020, 17:29
RE: New WeatherDuino installation in Italy - by werk_ag - 12-12-2020, 09:07
RE: New WeatherDuino installation in Italy - by xxDvDxx - 12-12-2020, 13:22
RE: New WeatherDuino installation in Italy - by werk_ag - 14-12-2020, 05:23
RE: New WeatherDuino installation in Italy - by xxDvDxx - 28-12-2020, 16:22
RE: New WeatherDuino installation in Italy - by werk_ag - 29-12-2020, 04:39
RE: New WeatherDuino installation in Italy - by xxDvDxx - 29-12-2020, 11:23
RE: New WeatherDuino installation in Italy - by xxDvDxx - 29-12-2020, 12:20
RE: New WeatherDuino installation in Italy - by xxDvDxx - 29-12-2020, 15:26
RE: New WeatherDuino installation in Italy - by xxDvDxx - 29-12-2020, 17:39
RE: New WeatherDuino installation in Italy - by werk_ag - 30-12-2020, 00:50
RE: New WeatherDuino installation in Italy - by xxDvDxx - 31-12-2020, 15:07
RE: New WeatherDuino installation in Italy - by werk_ag - 02-01-2021, 02:19
RE: New WeatherDuino installation in Italy - by xxDvDxx - 02-01-2021, 10:14
RE: New WeatherDuino installation in Italy - by xxDvDxx - 09-01-2021, 16:04
RE: New WeatherDuino installation in Italy - by werk_ag - 11-01-2021, 03:35
RE: New WeatherDuino installation in Italy - by xxDvDxx - 13-01-2021, 14:14
RE: New WeatherDuino installation in Italy - by xxDvDxx - 14-01-2021, 11:30
RE: New WeatherDuino installation in Italy - by werk_ag - 29-01-2021, 20:33
RE: New WeatherDuino installation in Italy - by werk_ag - 15-01-2021, 00:18
RE: New WeatherDuino installation in Italy - by xxDvDxx - 19-01-2021, 08:53
RE: New WeatherDuino installation in Italy - by xxDvDxx - 20-01-2021, 11:04
RE: New WeatherDuino installation in Italy - by werk_ag - 21-01-2021, 21:10
RE: New WeatherDuino installation in Italy - by xxDvDxx - 28-01-2021, 16:48
RE: New WeatherDuino installation in Italy - by werk_ag - 28-01-2021, 19:54
RE: New WeatherDuino installation in Italy - by xxDvDxx - 08-02-2021, 12:59
RE: New WeatherDuino installation in Italy - by xxDvDxx - 10-02-2021, 10:35
RE: New WeatherDuino installation in Italy - by werk_ag - 11-02-2021, 00:17
RE: New WeatherDuino installation in Italy - by werk_ag - 11-02-2021, 03:50
RE: New WeatherDuino installation in Italy - by xxDvDxx - 11-02-2021, 12:21
RE: New WeatherDuino installation in Italy - by werk_ag - 11-02-2021, 19:49
RE: TX Board v 2.5 and Pro2 Plus Receiver - by uncle_bob - 02-11-2020, 23:26
RE: TX Board v 2.5 and Pro2 Plus Receiver - by werk_ag - 03-11-2020, 01:33
RE: TX Board v 2.5 and Pro2 Plus Receiver - by bombenm - 03-11-2020, 15:55
RE: TX Board v 2.5 and Pro2 Plus Receiver - by bombenm - 03-11-2020, 16:04
RE: TX Board v 2.5 and Pro2 Plus Receiver - by werk_ag - 08-12-2020, 23:22
RE: TX Board v 2.5 and Pro2 Plus Receiver - by xxDvDxx - 11-12-2020, 16:08



Users browsing this thread: 1 Guest(s)