(12-02-2015, 00:06)hvalentim Wrote: Looking at it more carefully, I don't thing either the SHT15 or the SHT21 (or the HTU21D, since both have the same chip and board form factors) will fit the plastic cover. Not without some tweaking/cutting.
Answer to myself hopefully of use for future builders: these particular plastic covers may hold any of the temperature/humidity sensors. The limit to bear in mind is not width or length but depth. Meaning, there is not enough space for boards with straight up pins (see attached pictures).
As I suspected, one must use a connection with right angle pins (running parallel to the board).