07-05-2020, 20:43
Hi Jim,
There are several posts on the forum, about the date / time issue with the Pro2 Plus receiver.
The Pro2 PLUS is based on an AVR board (the ATmega 2560) and it should be programmed using AVR board manager 1.6.21 as stated on the download page.
Tested with Arduino IDE 1.8.10 using AVR Boards Manager 1.6.21.
It not work reliably with AVR Boards Manager 1.6.22 and 1.6.23
Latest AVR board manager is 1.8.2, however I haven't tested it yet. Most probably, is not works too. For WeatherDuino systems based on AVR boards, stay with AVR board manager v1.6.21.
Thanks
Rgs
There are several posts on the forum, about the date / time issue with the Pro2 Plus receiver.
The Pro2 PLUS is based on an AVR board (the ATmega 2560) and it should be programmed using AVR board manager 1.6.21 as stated on the download page.
Tested with Arduino IDE 1.8.10 using AVR Boards Manager 1.6.21.
It not work reliably with AVR Boards Manager 1.6.22 and 1.6.23
Latest AVR board manager is 1.8.2, however I haven't tested it yet. Most probably, is not works too. For WeatherDuino systems based on AVR boards, stay with AVR board manager v1.6.21.
Thanks
Rgs