[richaam]

Hello all,

My Pro2 Plus build is complete. However, I'm having issues connecting the Rx to the internet. I'm beginning to think it may be a damaged WiFi module that is causing the issues. The light for the module is constantly on (never flashing). Attached is my code and results from the WiFi debug. 

Good news, I received my new sensor yesterday and everything is working! Thank you to everyone for your help.

Hello Adam,

From your message two months ago, I suppose the reported issue with the WiFi started suddenly.
Is everything else working? Display, sensors, etc?
The blue led always ON the WiFi module, is not a good sign. Does it goes OFF when you press the reset button?

Rgs

Werk, I'm not sure when the issue started. I just noticed it yesterday after finalizing the install of my station outside. I went to enable the internet connection in order to setup wunderground and quickly realized that something was not right.

Everything else is working well. The time is an hour behind, but I assume this is from the inability to contact a time server. 

The blue light is constantly on when power is supplied to the unit. It does not go off when you hit reset. 

I've checked my router logs and have confirmed that the Rx has made no attempt to communicate with it.

Are there any tests I can do to confirm that it is a hardware problem with the WiFi module? I am planning on connecting a Raspberry Pi with cumulus, so it may not be a big deal if I can't get it working.

Thanks,

Adam