14-01-2019, 02:38
Hi,
I found a 10-pin VEML6075 breakout for only US$5.25 , so now I will just have to be patient (and keep my fingers crossed).
AFAIK the SHT3x humidity sensors are 2.4 - 5.5 volts tolerant so shouldn't need any level shifter?
On a related topic, RS Components (still known as "RadioSpares" by some people) sell the Sensirion filter caps for only around £1 / Euro each (depending on quantity). They're mainly intended for the SHT2x (and a suitably designed PCB) but it's not too difficult to cut off or modify their "pegs" and fit to the cheap Chinese breakout boards. I've not discovered which glues are "safe" (or not) to use near these humidity sensors, but the filters might extend their life, particularly outdoors. :
https://uk.rs-online.com/web/c/?searchTe...ra=oss&r=t
Cheers, Alan.
I found a 10-pin VEML6075 breakout for only US$5.25 , so now I will just have to be patient (and keep my fingers crossed).
AFAIK the SHT3x humidity sensors are 2.4 - 5.5 volts tolerant so shouldn't need any level shifter?
On a related topic, RS Components (still known as "RadioSpares" by some people) sell the Sensirion filter caps for only around £1 / Euro each (depending on quantity). They're mainly intended for the SHT2x (and a suitably designed PCB) but it's not too difficult to cut off or modify their "pegs" and fit to the cheap Chinese breakout boards. I've not discovered which glues are "safe" (or not) to use near these humidity sensors, but the filters might extend their life, particularly outdoors. :
https://uk.rs-online.com/web/c/?searchTe...ra=oss&r=t
Cheers, Alan.