Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

UVM-30A - calibration?
#4

(02-11-2018, 02:27)41south Wrote:  i'm currently reading 11.9 for about 1.052 v at the sensor output/A1 input

That is close to what should be the maximum UV reading when using UV_Transmission = 100. If you are having a sunny day without cloud on the sky, that reading may not be to far from reality (its Spring on NZ now I think).
What are the average UV readings at nearby weather stations? Use WU if needed.
Make sure the sensor is pointing to the sky in horizontal position, not facing the sun.

Reply


Messages In This Thread
UVM-30A - calibration? - by 41south - 02-11-2018, 00:55
RE: UVM-30A - calibration? - by werk_ag - 02-11-2018, 01:29
RE: UVM-30A - calibration? - by 41south - 02-11-2018, 02:27
RE: UVM-30A - calibration? - by werk_ag - 02-11-2018, 02:46
RE: UVM-30A - calibration? - by 41south - 02-11-2018, 03:02
RE: UVM-30A - calibration? - by werk_ag - 02-11-2018, 05:29
RE: UVM-30A - calibration? - by 41south - 02-11-2018, 07:05
RE: UVM-30A - calibration? - by 41south - 14-11-2018, 22:25
RE: UVM-30A - calibration? - by 41south - 14-11-2018, 23:25
RE: UVM-30A - calibration? - by werk_ag - 15-11-2018, 00:03
RE: UVM-30A - calibration? - by 41south - 15-11-2018, 00:15
RE: UVM-30A - calibration? - by werk_ag - 15-11-2018, 01:16
RE: UVM-30A - calibration? - by 41south - 15-11-2018, 21:44



Users browsing this thread: 1 Guest(s)