[41south]

Well that got rid of the bad data - but ...... the information in the LOOP is almost totally fictitious and bears very little if no relationship to the data on the console TFT

Baro, UV, solar, temps are all wrong and compared to before the LOOP packet looks quite small?


LOOP:   2018-10-31 12:31:35 NZDT (1540942295) altimeter: 1053.60746351, appTemp: -2.13558531939, barometer: 1053.16342077, cloudbase: 384.852796518, dateTime: 1540942295, dewpoint: -2.81211985001, heatindex: 0.226223048565, humidex: 0.226223048565, inDewpoint: -0.512212601359, inHumidity: 29.996106225, inTemp: 17.2233038264, maxSolarRad: 950.382756578, outHumidity: 79.9970795266, outTemp: 0.226223048565, pressure: 1053.16342077, radiation: 981.148577966, rain: 0.0, rainRate: 0.0, usUnits: 16, UV: 13.7360800915, windchill: 0.226223048565, windDir: 359.98247716, windGust: 0.000940011594201, windGustDir: 359.98247716, windSpeed: 0.000783342995168

My process was to run the utility - this finished ok according to the serial monitor

Status register :10001100
Manufacturer ID :
1F
Device ID (part 1) :
22
Device ID (part 2)  :
0
Extended Device Information String Length  :
0
Erasing the Flash memory... Please wait!
...
Erase done!

Then reloaded B008