07-02-2015, 04:15
(07-02-2015, 02:37)tyntop Wrote: Construction for me is fairly easy, but I will need some help with regards the software so I am hoping you can help
Give it a go, it's pretty simple really.
Download the Arduino IDE.
Set the board type in the IDE.
Find and set the com port (device manager show which). You may need to download the Serial adaptor chipset driver for your Nano if its the CH304G, there's a thread here with it.
Set the processor type (ATmega328).
Change the options in the Weatherduino Pro2 software to suit your location and sensors etc.
Press the right pointing arrow to compile and upload the software.
Done!