02-09-2018, 07:18
(01-09-2018, 08:16)engolling Wrote: You can map it to an extra sensor but you loose resolution. It would be the same is you had two anemometers and so on...
Since the transmission via UART is very fast it would be no problem to send it with an higher update rate for example with 1Hz to get all readings as they were received by the RX time dependent.
It would also be thinkable to capture only the wind data with an elevated frequency. The modification of the RX would be easy and also the logging script is easy to modify.
Hi engolling,
Excellent idea to study 2 sensors without having to assemble two systems.
I am admiring fronts the geniuses of the soldering iron.
Good sunday.
PS: My wife was born in Köln and lived until her 6 years, it has to keep certain German expressions.