07-08-2018, 20:25
Hi Stefan, again,
Most of the knowledge of Werk_AG, or the results of my tests, is still in the closed part of the developer and testers forum.
This is because I have not yet started the routine operation of a new transmitter, equipped with new sensors, among others
the mentioned Hongyuv HY-WDC2E ...
But I have to confirm that the experience of my tests has made me very excited. The device is very robust and works exactly
as it is written in the manual. I do not know why, but I did not even pay customs or VAT on import. Probably because one piece
of anemometer is considered by the Customs as a development sample. From this point of view, the resulting USD 295, including
transport, was very advantageous and acceptable.
For others, here are some basic parameters:
A more detailed description of this and other sensors and "compact" weather stations is available on the Hong Kong website
at URL http://www.hongyuv.com/en/
I would like to thank you, Stephan, for your patience, helpfulness and resilience in answering my repeated and frequent questions.
(07-08-2018, 08:56)stefan Wrote: [b]We recently developed a cheap ultrasonic anemometer only cost 380 USD/UNIT.
HY-WDC2DVSE Ultrasonic Wind Vane Anemometer
Compatible with Davis Vantage Pro2 Equipment[/b]
Our website: www.hongyuv.com/en
My email: stefan@hongyuv.com
Contact me if you have any interest.
Most of the knowledge of Werk_AG, or the results of my tests, is still in the closed part of the developer and testers forum.
This is because I have not yet started the routine operation of a new transmitter, equipped with new sensors, among others
the mentioned Hongyuv HY-WDC2E ...
(07-08-2018, 08:56)stefan Wrote:(10-07-2018, 00:00)hornychz Wrote: We are using RS485 with MODBUS with interface developed by Werk_AG.
I still have everything on the table, the final installation will probably not be until September.
But the set works perfectly perfectly! (See http://wiki.weatherduino.com/supported_w...nstruments )
But I have to confirm that the experience of my tests has made me very excited. The device is very robust and works exactly
as it is written in the manual. I do not know why, but I did not even pay customs or VAT on import. Probably because one piece
of anemometer is considered by the Customs as a development sample. From this point of view, the resulting USD 295, including
transport, was very advantageous and acceptable.
For others, here are some basic parameters:
A more detailed description of this and other sensors and "compact" weather stations is available on the Hong Kong website
at URL http://www.hongyuv.com/en/
I would like to thank you, Stephan, for your patience, helpfulness and resilience in answering my repeated and frequent questions.