15-07-2018, 22:53
Hi
I recently attached a Pi Zero W to my RX, I measured idle current of the Pi at about 80 mA, and about 60 mA once I switched off the hdmi.
Boot up and initiation was about 160 to 180 mA. This was measured with one of those plug in USB volt / amp meters, so mightn't be exactly accurate.The WiFi is on, it is running Cumulus
I have the Pro2 Plus RX and Pi zero running off the same 2A power supply, seems ok so far.
Regards,
Heeby
I recently attached a Pi Zero W to my RX, I measured idle current of the Pi at about 80 mA, and about 60 mA once I switched off the hdmi.
Boot up and initiation was about 160 to 180 mA. This was measured with one of those plug in USB volt / amp meters, so mightn't be exactly accurate.The WiFi is on, it is running Cumulus
I have the Pro2 Plus RX and Pi zero running off the same 2A power supply, seems ok so far.
Regards,
Heeby