15-07-2018, 16:34
Hello Jim,
another solution would be to buy a raspberry pi zero w. This can be connected to the TX board via USB and can work as WiFi AP and it also can run the Arduino IDE.
So it would be possible to connect over RDP oder SSH with a laptop to your Pi Zero W and update the software on the TX Board.
The negative aspect is, that the Zero W has a current consumption of about 300mA in idle mode.
Regards,
Engolling
another solution would be to buy a raspberry pi zero w. This can be connected to the TX board via USB and can work as WiFi AP and it also can run the Arduino IDE.
So it would be possible to connect over RDP oder SSH with a laptop to your Pi Zero W and update the software on the TX Board.
The negative aspect is, that the Zero W has a current consumption of about 300mA in idle mode.
Regards,
Engolling