FO anemometer reading seems low - Printable Version

+- WeatherDuino Forum (https://www.meteocercal.info/forum)
+-- Forum: Weather Stations - WeatherDuino Pro2 Line (https://www.meteocercal.info/forum/forum-4.html)
+--- Forum: General Talking (https://www.meteocercal.info/forum/forum-23.html)
+--- Thread: FO anemometer reading seems low (/thread-330.html)

---

FO anemometer reading seems low - tyntop - 07-07-2015

Hi,
I have had my weather station up and running for a while now I am happy with most of the readings I am getting, except the wind speed,
which to me seems low

I am using FO anemometer which is freely rotating, hearing the 2 clicks/ticks per rotation, that I understand/believe you should get. I am using RX/TX v013 at present and using the settings as advised in the post RX/TX v013 Software configuration, speed is set to mph, multipliers 0,448.

any suggestions as to what the problem may be ?

regards
tyntop.

---

RE: FO anemometer reading seems low - AllyCat - 07-07-2015

Hi,

Is your anememoter mounted 10 metres above ground level in a "clear" field with no significant obstructions nearby?

Cheers, Alan.

---

RE: FO anemometer reading seems low - uncle_bob - 07-07-2015

Just to be clear, you have set the settings correctly in both the Weatherduino Pro2 sketch and Cumulus?

---