WD Pro4 Weather Display - Printable Version
+- WeatherDuino Forum (https://www.meteocercal.info/forum)
+-- Forum: Weather Stations - WeatherDuino Pro2 Line (https://www.meteocercal.info/forum/forum-4.html)
+--- Forum: Hardware Questions (https://www.meteocercal.info/forum/forum-11.html)
+--- Thread: WD Pro4 Weather Display (/thread-1414.html)
+- WeatherDuino Forum (https://www.meteocercal.info/forum)
+-- Forum: Weather Stations - WeatherDuino Pro2 Line (https://www.meteocercal.info/forum/forum-4.html)
+--- Forum: Hardware Questions (https://www.meteocercal.info/forum/forum-11.html)
+--- Thread: WD Pro4 Weather Display (/thread-1414.html)
WD Pro4 Weather Display - Barrow4491 - 29-06-2018
Werk,
Can you please advise the pin-out for the T/H sensor connector and the sensors suitable for use with the unit
Regards
Jim
RE: WD Pro4 Weather Display - werk_ag - 29-06-2018
Hi Jim,
On the software package for the WD Pro4 Weather Display, there is folder called pinout, there you can find an image with the pinout for the T/H sensor.
Regarding the supported sensors, please give a look at the software user configurable options:
Code:
// --- Define type of Local TH sensor
#define INSIDE_TH_SENSOR 9 // 0= BME280, 1= HTU21D, 2= SHT21, 3= SHT31, 9= Use Main Station TH sensorPreferably use the 3.3V versions. For the WD, I would recommend the SHT31, quality/price is the best.
Regards
Werk_AG