25-12-2017, 21:05
I changed this morning the RX module and the SMA connector without changing the values of the software. I receive the frames regularly and initialization is very fast. It seems that my SMA connector or my antennas are problematic, it is a model with a long drawn thread but by dint of screwing and unscrewing, there is play and contact with the pin of the antenna becomes random.
The SMA connectors are not at all designed to be connected and disconnected too many times, we talk about 10x max for a reliable contact, it is the same for the tightening torque
Having made various evolutions on the case of the RX and the TX by the addition of sensors, I had to prematurely damage the connectors. My research is now focused on hardware
The SMA connectors are not at all designed to be connected and disconnected too many times, we talk about 10x max for a reliable contact, it is the same for the tightening torque
Having made various evolutions on the case of the RX and the TX by the addition of sensors, I had to prematurely damage the connectors. My research is now focused on hardware