[werk_ag]

It doesn't depend on the number of sensors being used.
The logger has a capacity of 2560 records, and uses the same data structure used in Davis data loggers.
Archive interval can be configured from 1 minute to 120 minutes.

Here's the logger data storage based on the archive interval chosen.

Archive Storage Capacity (the amount of time before the archive is completely filled):
1 Minute Archive Interval . . . . . . . . . . . . . . . . . . . . . 42 hours
5 Minute Archive Interval . . . . . . . . . . . . . . . . . . . . . 8 days and 21 hours
10 Minute Archive Interval . . . . . . . . . . . . . . . . . . . . 17 days and 18 hours
15 Minute Archive Interval . . . . . . . . . . . . . . . . . . . . 26 days and 16 hours
30 Minute Archive Interval . . . . . . . . . . . . . . . . . . . . 53 days and 8 hours
60 Minute Archive Interval . . . . . . . . . . . . . . . . . . . . 106 days and 16 hours
120 Minute Archive Interval . . . . . . . . . . . . . . . . . . . 213 days and 8 hours

When "full" it overwrites oldest data.