17-09-2016, 00:32
(16-09-2016, 03:20)Werk_AG Wrote:Thanks Werk,(15-09-2016, 03:41)Barrow4491 Wrote: Werk,
I have found the issue...
Good news Jim! You did exactly what I would do to try discover the problem. Improvising!
However, as soon as you get the replacement of the faulty TX module, install it. That wire from the ANT output to the TX board, and then the cable to the Antenna, certainly will shorten the RF signal range.
Regards
I have a header socket for the Tx module as they seem to be a weak link in what is a brilliant project and difficult to de-solder ( I have had three faulty ones)
My next thing is a web camera for weather underground and some additional wireless displays. Is it possible to drive a larger display in the WD with the current setup?
Regards
Jim


