11-06-2018, 11:28
(10-06-2018, 21:26)heebyjeeby Wrote: 1. If I log in to the RX through the web interface, SRAD and UV always have a nonsense number beside them, at the moment SRAD is reading 43815 W/m2 and UV is reading 4355.9, the numbers increase depending on how long it has been running. I have no solar or uv sensors and have said so in the config. The actual displays on the RX and the WD show 0 for both readings, as expected, it is only on the web page that they are seen.
Hi heebyjeeby
And welcome ...
Do you have these sensors switched off in your TX (option 9)?
Do you have set "0 = Not to send this data" in your TX for "define ID4"?
Do you have set "1 = Send this data" for "define ID5"?

