[Wizza]

Hi Guys, I altered the collector_type to 0.229 in the TX config. I did run two very quick test based on 314ml of water and I got 42 and then 44 tips. Didn't have much time avail around family yesterday. It occurred to me that on the first test the syphon may have been empty and the buckets totally empty, thus 42 tips. The second test immediately after, the syphon would have been full and one bucket may have been part full, thus 44 tips. I re-ran the calculations, and agree that 0.229 seems to be the correct correction number. This would seem to indicate a bucket tip of about 7.1mL. This all said, while I could leave the calibration number at 0.229, maybe I should start to re-calibrate the gauge. Doesn't really phase me, and I think the tests are showing repeatedly that it is not calibrated. Who know, maybe the guy selling it made a gauge out of spare parts, and thus it looks all official but it is not calibrated. We'll never know. What we do know is that after installing a new reed switch, it seems to work, and work well, and looks like it needs some calibration. Its back to work for the week, and I'll look at put some time aside next weekend. Thanks for all the comments and assistance guys. Very much appreciated. This project is fast turning into a hobby, and something quite enjoyable. For me at least...
Cheers for now...
Mark R