[dormani]

Hi again,


Please download and install the updated firmware version for the AQM-III. It fixes the reported issue.

Thank you for your colaboration.

Rgs,
Werk_AG

The change you have made solved the issue I was having but may have introduced another problem. I could not upload the sketch to the ESP32 via serial port but could with OTA. I have tried numerous times, changed usb ports and cables. This has not been an issue before. As I said OTA is successful. I have pasted the error below

Code:

Sketch uses 871153 bytes (66%) of program storage space. Maximum is 1310720 bytes.
Global variables use 46728 bytes (14%) of dynamic memory, leaving 280952 bytes for local variables. Maximum is 327680 bytes.
esptool.py v3.3
Serial port COM5
Connecting.....................................An error occurred while uploading the sketch
.

A fatal error occurred: Failed to connect to ESP32: Invalid head of packet (0x6C): Possible serial noise or corruption.
For troubleshooting steps visit: https://docs.espressif.com/projects/esptool/en/latest/troubleshooting.html

Cheers
Ian