27-12-2015, 00:56
I'm not sure if splitting the analog signal from the wind vane between two arduinos will work. Have you tested it?
And maybe there is another problem, both arduinos should read the same vane in sync, which is difficult to achieve, unless with a unit with a synchronized clock.
A careful adjust of the pot in the TX unit helps a lot in some types of bouncing characteristic of the FO wind vanes.
And maybe there is another problem, both arduinos should read the same vane in sync, which is difficult to achieve, unless with a unit with a synchronized clock.
A careful adjust of the pot in the TX unit helps a lot in some types of bouncing characteristic of the FO wind vanes.