https://www.meteocercal.info/forum/ Thu, 16 Apr 2026 07:16:08 +0000 MyBB https://www.meteocercal.info/forum/thread-2277.html Thu, 01 Feb 2024 19:55:28 +0000 werk_ag]]> https://www.meteocercal.info/forum/thread-2277.html


WeatherDuino Wireless Display II

New 2024 version

- More powerfull. New units use an ESP32 microcontoller, instead of a ESP8266.
- Bigger screen. New units use a 3.2" touch display with backlight control (ON/OFF, Dim).
- Integrated appearance. Units have the same size of 4Pro DB receivers, which also means they can use the same 3D printed boxes, resulting in an integrated look and feel.






Overview:

The 4Pro Wireless Display II are a kind of very special devices. They work not only as a remote display for your weather station, and also as an additional Temperature / Humidity sensor. They use your WiFi network to send and receive data from WeatherDuino weather stations.
The 4Pro Wireless Display II devices can be used to monitor the Temperature / Humidity of any room or special place in your home.
Up to four units can be used as extra sensors, but dozen of them can be used as remote displays for your weather station. Data is updated almost in real time.


Power Specifications:

- Power Supply: 5V, 250mA - Can be powered via USB port, or onboard power connector.
- Average Consumption: 150mA





Prices

Fully assembled, including 3.2 TFT touch display: 52.90€
(3D printable box not included)

Shipping Method and Costs

All shipments are done via registered Air Mail.
Once shipment is done we provide the tracking number.

Any country within the Eurozone: 9.10€
Worldwide: 12.40€


Payment Method

PayPal Only


How to Order?

Orders are done by sending a PM to Werk_AG.
Click here, and describe the item or items you want to order.
Combined shipping is available.


3D printable box

The files for a 3D printable box are available on the Downloads area.]]>


WeatherDuino Wireless Display II

New 2024 version

- More powerfull. New units use an ESP32 microcontoller, instead of a ESP8266.
- Bigger screen. New units use a 3.2" touch display with backlight control (ON/OFF, Dim).
- Integrated appearance. Units have the same size of 4Pro DB receivers, which also means they can use the same 3D printed boxes, resulting in an integrated look and feel.






Overview:

The 4Pro Wireless Display II are a kind of very special devices. They work not only as a remote display for your weather station, and also as an additional Temperature / Humidity sensor. They use your WiFi network to send and receive data from WeatherDuino weather stations.
The 4Pro Wireless Display II devices can be used to monitor the Temperature / Humidity of any room or special place in your home.
Up to four units can be used as extra sensors, but dozen of them can be used as remote displays for your weather station. Data is updated almost in real time.


Power Specifications:

- Power Supply: 5V, 250mA - Can be powered via USB port, or onboard power connector.
- Average Consumption: 150mA





Prices

Fully assembled, including 3.2 TFT touch display: 52.90€
(3D printable box not included)

Shipping Method and Costs

All shipments are done via registered Air Mail.
Once shipment is done we provide the tracking number.

Any country within the Eurozone: 9.10€
Worldwide: 12.40€


Payment Method

PayPal Only


How to Order?

Orders are done by sending a PM to Werk_AG.
Click here, and describe the item or items you want to order.
Combined shipping is available.


3D printable box

The files for a 3D printable box are available on the Downloads area.]]> https://www.meteocercal.info/forum/thread-1971.html Tue, 06 Apr 2021 02:35:04 +0000 werk_ag]]> https://www.meteocercal.info/forum/thread-1971.html


WeatherDuino Wireless Display

This device is no more available, it was been replaced by the new WeatherDuino Wireless Display II
As usual, user support and firmware updates will continue whenever is needed.

https://www.meteocercal.info/forum/video...isplay.mp4




Overview:

The 4Pro Wireless Display are a kind of very special devices. They work not only as a remote display for your weather station, and also as an additional Temperature / Humidity sensor. They use your WiFi network to send and receive data from WeatherDuino weather stations.
The 4Pro Wireless Display devices can be used to monitor the Temperature / Humidity of any room or special place in your home.
Up to four units can be used as extra sensors, but dozen of them can be used as remote displays for your weather station. Data are updated almost in real time.


Power Specifications:

- Power Supply: 5V micro USB - 250mA
- Average Consumption: 150mA


Prices

Fully assembled, including TFT touch display: 42.90€ (Out of Stock)

Not Included
The box shown on the picture is not included, but files for 3D print are available for free at Thingiverse.
The extra Temperature / Humidity sensor (BME280, HTU21D, SHT21 or SHT31)


Shipping Method and Costs

All shipments are done via registered Air Mail.
Once shipment is done we provide the tracking number.

Any country within the Eurozone: 9.10€
Worldwide: 12.40€


Payment Method

PayPal Only


How to Order?

Orders are done by sending a PM to Werk_AG.
Click here, and describe the item or items you want to order.
Combined shipping is available.]]>


WeatherDuino Wireless Display

This device is no more available, it was been replaced by the new WeatherDuino Wireless Display II
As usual, user support and firmware updates will continue whenever is needed.

https://www.meteocercal.info/forum/video...isplay.mp4




Overview:

The 4Pro Wireless Display are a kind of very special devices. They work not only as a remote display for your weather station, and also as an additional Temperature / Humidity sensor. They use your WiFi network to send and receive data from WeatherDuino weather stations.
The 4Pro Wireless Display devices can be used to monitor the Temperature / Humidity of any room or special place in your home.
Up to four units can be used as extra sensors, but dozen of them can be used as remote displays for your weather station. Data are updated almost in real time.


Power Specifications:

- Power Supply: 5V micro USB - 250mA
- Average Consumption: 150mA


Prices

Fully assembled, including TFT touch display: 42.90€ (Out of Stock)

Not Included
The box shown on the picture is not included, but files for 3D print are available for free at Thingiverse.
The extra Temperature / Humidity sensor (BME280, HTU21D, SHT21 or SHT31)


Shipping Method and Costs

All shipments are done via registered Air Mail.
Once shipment is done we provide the tracking number.

Any country within the Eurozone: 9.10€
Worldwide: 12.40€


Payment Method

PayPal Only


How to Order?

Orders are done by sending a PM to Werk_AG.
Click here, and describe the item or items you want to order.
Combined shipping is available.]]>