<![CDATA[WeatherDuino Forum - User support forum for 4Pro Wireless Display devices]]> https://www.meteocercal.info/forum/ Tue, 20 Oct 2026 09:08:12 +0000 MyBB <![CDATA[error: 'TXINFO_DATA' was not declared in this scope]]> https://www.meteocercal.info/forum/thread-2276.html Tue, 30 Jan 2024 05:55:16 +0000 Sun_Dancer]]> https://www.meteocercal.info/forum/thread-2276.html I'm currently compiling the current firmware, but I always get an error message. Have I made the wrong setting?


Quote:Arduino: 1.8.19 (Windows Store 1.8.57.0) (Windows 10), Board: "LOLIN(WEMOS) D1 R2 & mini, 80 MHz, Flash, Legacy (new can return nullptr), All SSL ciphers (most compatible), 4MB (FS:2MB OTA:~1019KB), v2 Lower Memory, Disabled, None, Only Sketch, 921600"

WeatherDuino_4PESP8266_WD_v7.4_b006:111:95: error: 'TXINFO_DATA' was not declared in this scope
 const uint8_t DataScreensOrder[6]    = {0, EXTRASENSORS_DATA, SOILLEAF_DATA, AIRQUALITY_DATA, TXINFO_DATA, FORECAST_DATA};
                                                                                               ^
C:\Users\skoda\Documents\Arduino\Sketchbook\WeatherDuino_4PESP8266_WD_v7.4_b006_20240107\software\WeatherDuino_4PESP8266_WD_v7.4_b006\D_TFT.ino: In function 'void draw_TXinfo()':
D_TFT:805:23: error: 'TXINFO_DATA' was not declared in this scope
   if (activeWindow != TXINFO_DATA)
                       ^
C:\Users\skoda\Documents\Arduino\Sketchbook\WeatherDuino_4PESP8266_WD_v7.4_b006_20240107\software\WeatherDuino_4PESP8266_WD_v7.4_b006\D_TFT.ino: In function 'void update_12Hforecast()':
D_TFT:943:32: error: 'myTZ' was not declared in this scope
   uint32_t TZ_offset = now() - myTZ.toUTC(now());
                                ^
C:\Users\skoda\Documents\Arduino\Sketchbook\WeatherDuino_4PESP8266_WD_v7.4_b006_20240107\software\WeatherDuino_4PESP8266_WD_v7.4_b006\D_TFT.ino: In function 'void Update_Display()':
D_TFT:1137:28: error: 'TXINFO_DATA' was not declared in this scope
   else if (activeWindow == TXINFO_DATA) draw_TXinfo();
                            ^
C:\Users\skoda\Documents\Arduino\Sketchbook\WeatherDuino_4PESP8266_WD_v7.4_b006_20240107\software\WeatherDuino_4PESP8266_WD_v7.4_b006\NET.ino: In function 'void getNtpTime()':
NET:69:15: error: 'myTZ' was not declared in this scope
       local = myTZ.toLocal(epoch);
               ^
exit status 1
'TXINFO_DATA' was not declared in this scope
]]> I'm currently compiling the current firmware, but I always get an error message. Have I made the wrong setting?


Quote:Arduino: 1.8.19 (Windows Store 1.8.57.0) (Windows 10), Board: "LOLIN(WEMOS) D1 R2 & mini, 80 MHz, Flash, Legacy (new can return nullptr), All SSL ciphers (most compatible), 4MB (FS:2MB OTA:~1019KB), v2 Lower Memory, Disabled, None, Only Sketch, 921600"

WeatherDuino_4PESP8266_WD_v7.4_b006:111:95: error: 'TXINFO_DATA' was not declared in this scope
 const uint8_t DataScreensOrder[6]    = {0, EXTRASENSORS_DATA, SOILLEAF_DATA, AIRQUALITY_DATA, TXINFO_DATA, FORECAST_DATA};
                                                                                               ^
C:\Users\skoda\Documents\Arduino\Sketchbook\WeatherDuino_4PESP8266_WD_v7.4_b006_20240107\software\WeatherDuino_4PESP8266_WD_v7.4_b006\D_TFT.ino: In function 'void draw_TXinfo()':
D_TFT:805:23: error: 'TXINFO_DATA' was not declared in this scope
   if (activeWindow != TXINFO_DATA)
                       ^
C:\Users\skoda\Documents\Arduino\Sketchbook\WeatherDuino_4PESP8266_WD_v7.4_b006_20240107\software\WeatherDuino_4PESP8266_WD_v7.4_b006\D_TFT.ino: In function 'void update_12Hforecast()':
D_TFT:943:32: error: 'myTZ' was not declared in this scope
   uint32_t TZ_offset = now() - myTZ.toUTC(now());
                                ^
C:\Users\skoda\Documents\Arduino\Sketchbook\WeatherDuino_4PESP8266_WD_v7.4_b006_20240107\software\WeatherDuino_4PESP8266_WD_v7.4_b006\D_TFT.ino: In function 'void Update_Display()':
D_TFT:1137:28: error: 'TXINFO_DATA' was not declared in this scope
   else if (activeWindow == TXINFO_DATA) draw_TXinfo();
                            ^
C:\Users\skoda\Documents\Arduino\Sketchbook\WeatherDuino_4PESP8266_WD_v7.4_b006_20240107\software\WeatherDuino_4PESP8266_WD_v7.4_b006\NET.ino: In function 'void getNtpTime()':
NET:69:15: error: 'myTZ' was not declared in this scope
       local = myTZ.toLocal(epoch);
               ^
exit status 1
'TXINFO_DATA' was not declared in this scope
]]> <![CDATA[Screen_timer var]]> https://www.meteocercal.info/forum/thread-2273.html Tue, 09 Jan 2024 00:26:03 +0000 hornychz]]> https://www.meteocercal.info/forum/thread-2273.html
New version 7.4 b006 20240107:

I'm not entirely sure, but I think the main file is missing a variable definition "Screen_timer"
I added it to main .ino into raw No. 145:
 
Code:
wint32_t Screen_timer;

.jpg Výstřižek.JPG Size: 16,62 KB  Downloads: 99
]]>
New version 7.4 b006 20240107:

I'm not entirely sure, but I think the main file is missing a variable definition "Screen_timer"
I added it to main .ino into raw No. 145:
 
Code:
wint32_t Screen_timer;

.jpg Výstřižek.JPG Size: 16,62 KB  Downloads: 99
]]> <![CDATA[SPIFFS upload]]> https://www.meteocercal.info/forum/thread-2261.html Fri, 04 Aug 2023 01:38:20 +0100 Barrow4491]]> https://www.meteocercal.info/forum/thread-2261.html Cannot find the ESP6266 upload item in my Arduino for uploading SPIFFS, please advise
Jim]]> Cannot find the ESP6266 upload item in my Arduino for uploading SPIFFS, please advise
Jim]]> <![CDATA[Forecast Icons - Barrow4491]]> https://www.meteocercal.info/forum/thread-2240.html Fri, 23 Jun 2023 08:51:29 +0100 Barrow4491]]> https://www.meteocercal.info/forum/thread-2240.html Photo of my WD units
Why does one not show the icons as the files are identical?
Can you tell me what i am doing wrong please
Regards
Jim

.jpeg IMG_4964.jpeg Size: 328,34 KB  Downloads: 58
]]> Photo of my WD units
Why does one not show the icons as the files are identical?
Can you tell me what i am doing wrong please
Regards
Jim

.jpeg IMG_4964.jpeg Size: 328,34 KB  Downloads: 58
]]> <![CDATA[No forecast - Barrow4491]]> https://www.meteocercal.info/forum/thread-2237.html Fri, 09 Jun 2023 04:32:41 +0100 Barrow4491]]> https://www.meteocercal.info/forum/thread-2237.html I am doing a general check of my systems and upgrading software where needed.
I notice on my WD on the forecast screen I am only getting what is shown in the attached photo, whatvam I doing wrong?[attachment=3159]]]> I am doing a general check of my systems and upgrading software where needed.
I notice on my WD on the forecast screen I am only getting what is shown in the attached photo, whatvam I doing wrong?[attachment=3159]]]> <![CDATA[Trouble compiling Wireless Display Software]]> https://www.meteocercal.info/forum/thread-2224.html Thu, 19 Jan 2023 11:41:47 +0000 coupe pete]]> https://www.meteocercal.info/forum/thread-2224.html
Code:
Using library EEPROM at version 1.0 in folder: C:\Users\spenc\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.1\libraries\EEPROM  Using library TFT_eSPI at version 2.3.70 in folder: C:\Users\spenc\OneDrive\Petes Documents\Arduino\libraries\TFT_eSPI-master  Using library SPI at version 1.0 in folder: C:\Users\spenc\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.1\libraries\SPI  Using library Timezone at version 1.2.2 in folder: C:\Users\spenc\OneDrive\Petes Documents\Arduino\libraries\Timezone  Using library Time at version 1.6 in folder: C:\Users\spenc\OneDrive\Petes Documents\Arduino\libraries\Time-master  Using library TFT_eFEX at version 0.0.5 in folder: C:\Users\spenc\OneDrive\Petes Documents\Arduino\libraries\TFT_eFEX-0.0.5  Using library JPEGDecoder at version 1.8.1 in folder: C:\Users\spenc\OneDrive\Petes Documents\Arduino\libraries\JPEGDecoder-1.8.1  Using library ESP8266WiFi at version 1.0 in folder: C:\Users\spenc\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.1\libraries\ESP8266WiFi  Using library ESP8266mDNS at version 1.2 in folder: C:\Users\spenc\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.1\libraries\ESP8266mDNS  Using library ESP8266WebServer at version 1.0 in folder: C:\Users\spenc\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.1\libraries\ESP8266WebServer  Using library ESP8266HTTPClient at version 1.2 in folder: C:\Users\spenc\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.1\libraries\ESP8266HTTPClient  Using library ArduinoOTA at version 1.0 in folder: C:\Users\spenc\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.1\libraries\ArduinoOTA  Using library RadioHead at version 1.119 in folder: C:\Users\spenc\OneDrive\Petes Documents\Arduino\libraries\RadioHead_v1.119  Using library Wire at version 1.0 in folder: C:\Users\spenc\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.1\libraries\Wire  Using library Adafruit HTU21DF Library at version 1.0.1 in folder: C:\Users\spenc\OneDrive\Petes Documents\Arduino\libraries\Adafruit_HTU21DF  Using library SHT21-master in folder: C:\Users\spenc\OneDrive\Petes Documents\Arduino\libraries\SHT21-master (legacy) Using library Adafruit SHT31 Library at version 1.0.0 in folder: C:\Users\spenc\OneDrive\Petes Documents\Arduino\libraries\Adafruit_SHT31  Using library BME280 at version 3.0.0 in folder: C:\Users\spenc\OneDrive\Petes Documents\Arduino\libraries\BME280-3.0.0  Using library ArduinoJson at version 6.17.2 in folder: C:\Users\spenc\OneDrive\Petes Documents\Arduino\libraries\ArduinoJson-6.x  Using library ESP_EEPROM at version 2.1.1 in folder: C:\Users\spenc\OneDrive\Petes Documents\Arduino\libraries\ESP_EEPROM-2.1.1  exit status 1 Compilation error: exit status 1

Any advice appreciated]]>
Code:
Using library EEPROM at version 1.0 in folder: C:\Users\spenc\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.1\libraries\EEPROM  Using library TFT_eSPI at version 2.3.70 in folder: C:\Users\spenc\OneDrive\Petes Documents\Arduino\libraries\TFT_eSPI-master  Using library SPI at version 1.0 in folder: C:\Users\spenc\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.1\libraries\SPI  Using library Timezone at version 1.2.2 in folder: C:\Users\spenc\OneDrive\Petes Documents\Arduino\libraries\Timezone  Using library Time at version 1.6 in folder: C:\Users\spenc\OneDrive\Petes Documents\Arduino\libraries\Time-master  Using library TFT_eFEX at version 0.0.5 in folder: C:\Users\spenc\OneDrive\Petes Documents\Arduino\libraries\TFT_eFEX-0.0.5  Using library JPEGDecoder at version 1.8.1 in folder: C:\Users\spenc\OneDrive\Petes Documents\Arduino\libraries\JPEGDecoder-1.8.1  Using library ESP8266WiFi at version 1.0 in folder: C:\Users\spenc\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.1\libraries\ESP8266WiFi  Using library ESP8266mDNS at version 1.2 in folder: C:\Users\spenc\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.1\libraries\ESP8266mDNS  Using library ESP8266WebServer at version 1.0 in folder: C:\Users\spenc\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.1\libraries\ESP8266WebServer  Using library ESP8266HTTPClient at version 1.2 in folder: C:\Users\spenc\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.1\libraries\ESP8266HTTPClient  Using library ArduinoOTA at version 1.0 in folder: C:\Users\spenc\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.1\libraries\ArduinoOTA  Using library RadioHead at version 1.119 in folder: C:\Users\spenc\OneDrive\Petes Documents\Arduino\libraries\RadioHead_v1.119  Using library Wire at version 1.0 in folder: C:\Users\spenc\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\3.1.1\libraries\Wire  Using library Adafruit HTU21DF Library at version 1.0.1 in folder: C:\Users\spenc\OneDrive\Petes Documents\Arduino\libraries\Adafruit_HTU21DF  Using library SHT21-master in folder: C:\Users\spenc\OneDrive\Petes Documents\Arduino\libraries\SHT21-master (legacy) Using library Adafruit SHT31 Library at version 1.0.0 in folder: C:\Users\spenc\OneDrive\Petes Documents\Arduino\libraries\Adafruit_SHT31  Using library BME280 at version 3.0.0 in folder: C:\Users\spenc\OneDrive\Petes Documents\Arduino\libraries\BME280-3.0.0  Using library ArduinoJson at version 6.17.2 in folder: C:\Users\spenc\OneDrive\Petes Documents\Arduino\libraries\ArduinoJson-6.x  Using library ESP_EEPROM at version 2.1.1 in folder: C:\Users\spenc\OneDrive\Petes Documents\Arduino\libraries\ESP_EEPROM-2.1.1  exit status 1 Compilation error: exit status 1

Any advice appreciated]]>