<![CDATA[WeatherDuino Forum - Circuit Boards (PCB) & Parts lists - Pro2 line]]> https://www.meteocercal.info/forum/ Thu, 04 Jun 2026 06:06:11 +0000 MyBB <![CDATA[Printed Circuit Boards for the Air Quality Monitor II]]> https://www.meteocercal.info/forum/Thread-Printed-Circuit-Boards-for-the-Air-Quality-Monitor-II Fri, 22 Mar 2019 23:30:43 +0000 werk_ag]]> https://www.meteocercal.info/forum/Thread-Printed-Circuit-Boards-for-the-Air-Quality-Monitor-II

Air Quality Monitor II



[Image: AQM_II_02_rdm.jpg]

https://www.meteocercal.info/forum/videos/AQM_II.mp4


Key features:

- Can be used by any person (doesn't require having an WeatherDuino Weather Station) for monitoring the Air Quality in any place of your home, indoor or outdoor.
- Can transmit Air Quality and T/H data to WeatherDuino receivers (when equipped with the RF transmitter).
- OLED display (Optional item. You may not install the OLED display, per example in a unit which is operating outdoor to send data to an WeatherDuino receiver).
- Can upload Air Quality data to online services like Thinkspeak, or to your own server (ex: to store data on a database).
- Several units can be used to form Air Quality Network. When a unit receives an HTTP GET it sends back the Air Quality data in JSON format.
- Powered via micro USB connector or connector on the PCB.
- Software can be upgraded by Over the Air (OTA). Requires WiFi connection.

The AQM II can work without WiFi connection, however several of their functionalities will be unavailable.
If WiFi isn't available on the location where you intend to install it, you may consider the use of the previous version of the Air Quality Monitor, still available.


What is needed and is not included:

- Temperature / Humidity sensor (SHT31)
- MH-Z19B CO2 sensor (can be assembled directly on the PCB with or without a socket, user choice).
- Dust Sensor: Plantower PMS7003 (recommended) or nova SDS011 (this one can't be assembled inside the AQM II box). Only four wires are used to connect the dust sensor to the PCB (less wires, less troubles)
- Power supply: 5V - 500mA. Average consumption is bellow 100mA, but when the sensors are read, power requirement increases.
- Depending of your assembling choices, some connectors or pin headers may be needed.


Optionals:

- 1.3" OLED display (I2C interface)
- H34C ASK 433Mhz transmitter plus SMA connector (can be supplied assembled on the PCB, see buying options below)


Picture below shows what you get on an WeatherDuino receiver, when the Air Quality Monitor II is setup to transmit data over radio frequency.

.png screenshot_WD_02.png Size: 5,52 KB  Downloads: 2203



Dust Sensor Connections:

PMS7003

 AQM II  PMS7003
 TX TXD - Pin 5
 SET SET - Pin 3

novaSDS011

 AQM II  novaSDS011
 TX TXD
 SET RXD


Outdoor install recommendations:

Install the AQM II  in a box with vent holes, away from any source of smoke, in a well ventilated place, but not directly exposed to weather elements, like rain, strong winds or direct sunlight. As an example, a well ventilated porch is a good place.
Preferably install the AQM II in a place with WiFi coverage.


Board Size:

85.00mm x 49.60mm


Prices:

The AQM II is no more in production, it was been replaced by the AQM III

- AQM II v1.3 full version (includes all SMD parts, microcontroller, High power H34C ASK 433Mhz transmitter, SMA connector): Out of Stock
- AQM II v1.3 without RF transmitter and SMA connector (includes all SMD parts, microcontroller): Out of Stock

Shipping Costs (Air Mail with tracking number)

Euro Zone and UK: 8.20€
Any country outside Euro Zone: 11.40€
(Combined shipping allowed: up to, any four WeatherDuino boards per packet)

Accepted Payment Methods: PayPal only


There is available a freely printable 3D box for the Air Quality Monitor II
Indoor Version: https://www.thingiverse.com/thing:3608306
Outdoor Version: https://www.thingiverse.com/thing:3608146
If you don't have a 3D printer, you can order your case directly from online 3D printing services like 3Dhubs.

[Image: aqmii_indoor.jpg] [Image: aqmii_outdoor.jpg]]]>

Air Quality Monitor II



[Image: AQM_II_02_rdm.jpg]

https://www.meteocercal.info/forum/videos/AQM_II.mp4


Key features:

- Can be used by any person (doesn't require having an WeatherDuino Weather Station) for monitoring the Air Quality in any place of your home, indoor or outdoor.
- Can transmit Air Quality and T/H data to WeatherDuino receivers (when equipped with the RF transmitter).
- OLED display (Optional item. You may not install the OLED display, per example in a unit which is operating outdoor to send data to an WeatherDuino receiver).
- Can upload Air Quality data to online services like Thinkspeak, or to your own server (ex: to store data on a database).
- Several units can be used to form Air Quality Network. When a unit receives an HTTP GET it sends back the Air Quality data in JSON format.
- Powered via micro USB connector or connector on the PCB.
- Software can be upgraded by Over the Air (OTA). Requires WiFi connection.

The AQM II can work without WiFi connection, however several of their functionalities will be unavailable.
If WiFi isn't available on the location where you intend to install it, you may consider the use of the previous version of the Air Quality Monitor, still available.


What is needed and is not included:

- Temperature / Humidity sensor (SHT31)
- MH-Z19B CO2 sensor (can be assembled directly on the PCB with or without a socket, user choice).
- Dust Sensor: Plantower PMS7003 (recommended) or nova SDS011 (this one can't be assembled inside the AQM II box). Only four wires are used to connect the dust sensor to the PCB (less wires, less troubles)
- Power supply: 5V - 500mA. Average consumption is bellow 100mA, but when the sensors are read, power requirement increases.
- Depending of your assembling choices, some connectors or pin headers may be needed.


Optionals:

- 1.3" OLED display (I2C interface)
- H34C ASK 433Mhz transmitter plus SMA connector (can be supplied assembled on the PCB, see buying options below)


Picture below shows what you get on an WeatherDuino receiver, when the Air Quality Monitor II is setup to transmit data over radio frequency.

.png screenshot_WD_02.png Size: 5,52 KB  Downloads: 2203



Dust Sensor Connections:

PMS7003

 AQM II  PMS7003
 TX TXD - Pin 5
 SET SET - Pin 3

novaSDS011

 AQM II  novaSDS011
 TX TXD
 SET RXD


Outdoor install recommendations:

Install the AQM II  in a box with vent holes, away from any source of smoke, in a well ventilated place, but not directly exposed to weather elements, like rain, strong winds or direct sunlight. As an example, a well ventilated porch is a good place.
Preferably install the AQM II in a place with WiFi coverage.


Board Size:

85.00mm x 49.60mm


Prices:

The AQM II is no more in production, it was been replaced by the AQM III

- AQM II v1.3 full version (includes all SMD parts, microcontroller, High power H34C ASK 433Mhz transmitter, SMA connector): Out of Stock
- AQM II v1.3 without RF transmitter and SMA connector (includes all SMD parts, microcontroller): Out of Stock

Shipping Costs (Air Mail with tracking number)

Euro Zone and UK: 8.20€
Any country outside Euro Zone: 11.40€
(Combined shipping allowed: up to, any four WeatherDuino boards per packet)

Accepted Payment Methods: PayPal only


There is available a freely printable 3D box for the Air Quality Monitor II
Indoor Version: https://www.thingiverse.com/thing:3608306
Outdoor Version: https://www.thingiverse.com/thing:3608146
If you don't have a 3D printer, you can order your case directly from online 3D printing services like 3Dhubs.

[Image: aqmii_indoor.jpg] [Image: aqmii_outdoor.jpg]]]> <![CDATA[WiFi WeatherDuino Wireless Display - Fully Assembled]]> https://www.meteocercal.info/forum/Thread-WiFi-WeatherDuino-Wireless-Display-Fully-Assembled Sun, 22 Jul 2018 02:02:35 +0100 werk_ag]]> https://www.meteocercal.info/forum/Thread-WiFi-WeatherDuino-Wireless-Display-Fully-Assembled

WiFi WeatherDuino Wireless Display Unit



[Image: WeatherDuino_4Pro_WD_ESP8266_04_web.jpg]


Info about WeatherDuino Wirelless Display units was moved to here: https://www.meteocercal.info/forum/thread-1971.html]]>

WiFi WeatherDuino Wireless Display Unit



[Image: WeatherDuino_4Pro_WD_ESP8266_04_web.jpg]


Info about WeatherDuino Wirelless Display units was moved to here: https://www.meteocercal.info/forum/thread-1971.html]]> <![CDATA[WeaterDuino Pro2 Compact - Fully Assembled]]> https://www.meteocercal.info/forum/Thread-WeaterDuino-Pro2-Compact-Fully-Assembled Wed, 30 May 2018 03:45:25 +0100 werk_ag]]> https://www.meteocercal.info/forum/Thread-WeaterDuino-Pro2-Compact-Fully-Assembled

WeatherDuino Pro2 Compact receiver

[Image: Pro2_Compact_Main_web640.jpg]

Value: 69.90€ - In Stock

This unit is supplied fully assembled, including TFT display, Atmospheric and Temperature / Humidity sensors.
Full info on this unit can be found here: WeatherDuino Pro2 Compact - Full Info


WeatherDuino Pro2 Compact - Bundle 1: 78.90€ - In Stock

1 x WeatherDuino Pro2 Compact
1 x WeatherDuino Pro2 TX v3.13

Limited time offer: Order a WeatherDuino Pro2 Compact Bundle 1, and get for free one Extended I2C bus adapter

 


WeatherDuino Pro2 Universal Transmitter

WeatherDuino Pro2 TX v3.13 - New May 2019 Version
Board size: 99.06mm x 59.36mm

 
[Image: WDPro2_TXv313_net.jpg]


PCB supplied as pictured: 11.90€ - In Stock
Parts List
 
Shipping Costs (Air Mail with tracking number)

Euro Zone and UK: 8.20€
Any country outside Euro Zone: 11.40€
(Combined shipping: up to, any 4 boards per packet)

Accepted Payment Methods: PayPal only

To order please send me a private message (PM) with details about type of boards and quantities.
 
WeatherDuino Pro2 Compact box

[Image: WirelessDisplay_box.jpg]

The required files for 3D printing this box, are freely available here: https://www.thingiverse.com/thing:3210539
If you don't have a 3D printer, you can order your case directly from online 3D printing services like 3Dhubs.]]>

WeatherDuino Pro2 Compact receiver

[Image: Pro2_Compact_Main_web640.jpg]

Value: 69.90€ - In Stock

This unit is supplied fully assembled, including TFT display, Atmospheric and Temperature / Humidity sensors.
Full info on this unit can be found here: WeatherDuino Pro2 Compact - Full Info


WeatherDuino Pro2 Compact - Bundle 1: 78.90€ - In Stock

1 x WeatherDuino Pro2 Compact
1 x WeatherDuino Pro2 TX v3.13

Limited time offer: Order a WeatherDuino Pro2 Compact Bundle 1, and get for free one Extended I2C bus adapter

 


WeatherDuino Pro2 Universal Transmitter

WeatherDuino Pro2 TX v3.13 - New May 2019 Version
Board size: 99.06mm x 59.36mm

 
[Image: WDPro2_TXv313_net.jpg]


PCB supplied as pictured: 11.90€ - In Stock
Parts List
 
Shipping Costs (Air Mail with tracking number)

Euro Zone and UK: 8.20€
Any country outside Euro Zone: 11.40€
(Combined shipping: up to, any 4 boards per packet)

Accepted Payment Methods: PayPal only

To order please send me a private message (PM) with details about type of boards and quantities.
 
WeatherDuino Pro2 Compact box

[Image: WirelessDisplay_box.jpg]

The required files for 3D printing this box, are freely available here: https://www.thingiverse.com/thing:3210539
If you don't have a 3D printer, you can order your case directly from online 3D printing services like 3Dhubs.]]> <![CDATA[WeatherDuino Pro2 PLUS RX 2.xx - Parts List]]> https://www.meteocercal.info/forum/Thread-WeatherDuino-Pro2-PLUS-RX-2-xx-Parts-List Sat, 07 Oct 2017 00:48:41 +0100 werk_ag]]> https://www.meteocercal.info/forum/Thread-WeatherDuino-Pro2-PLUS-RX-2-xx-Parts-List


[Image: WeatherDuinoPro2Plus_RX_v130_RevB_assembled.jpg]


WeatherDuino Pro2 PLUS RX v2.xx Parts List - Last Updated 2017/10/07
(Includes pictures of the required parts)
.pdf WeatherDuino_Pro2Plus_RX_v2.xx_PartsList.pdf Size: 899,43 KB  Downloads: 2349

.rar WeatherDuinoPRO2+_RX_v200RevA_bom_PartsList.rar Size: 1,02 KB  Downloads: 642
]]>


[Image: WeatherDuinoPro2Plus_RX_v130_RevB_assembled.jpg]


WeatherDuino Pro2 PLUS RX v2.xx Parts List - Last Updated 2017/10/07
(Includes pictures of the required parts)
.pdf WeatherDuino_Pro2Plus_RX_v2.xx_PartsList.pdf Size: 899,43 KB  Downloads: 2349

.rar WeatherDuinoPRO2+_RX_v200RevA_bom_PartsList.rar Size: 1,02 KB  Downloads: 642
]]> <![CDATA[Printed Circuit Boards for the WeatherDuino Pro2 PLUS system]]> https://www.meteocercal.info/forum/Thread-Printed-Circuit-Boards-for-the-WeatherDuino-Pro2-PLUS-system Mon, 25 Sep 2017 01:16:47 +0100 werk_ag]]> https://www.meteocercal.info/forum/Thread-Printed-Circuit-Boards-for-the-WeatherDuino-Pro2-PLUS-system


To build an WeatherDuino Pro2 PLUS weather station, the minimal requirements are one receiver unit (RX), plus one transmitter unit (TX). The Pro2 PLUS system supports up to four TX units.
The Wireless Display units are optional, but a very useful add-on.


WeatherDuino Pro2 PLUS Receiver

WeatherDuino Pro2 PLUS RX v2.00
Board size: 99.06mm x 86.36mm

[Image: WeatherDuinoPro2Plus_RX_v200_RevA_rdm.jpg]

Board only: 16.90€ - In Stock - More than 10 units
Board supplied as pictured, with all SMD parts already assembled: 54.90€ - This version is no more available.

Parts List


WeatherDuino Pro2 Universal Transmitter
Industrially produced, double face high quality HASL free boards.


WeatherDuino Pro2 TX v3.13
Board size: 99.06mm x 59.36mm


[Image: WDPro2_TXv313_net.jpg]


PCB supplied as pictured: 11.90€ -  In Stock
Parts List



[Image: WirelessDisplay_4Pro_logo01.png]

Optional WiFi WeatherDuino Wireless Display Unit


WeatherDuino 4Pro WD v1.20_RevA


[Image: WeatherDuino_4Pro_WD_ESP8266_04_web.jpg]

Supplied fully assembled, including the TFT display

RF + WiFi Version (includes the RF receiver module and SMA connector): 47.90€ - In Stock
WiFi Version (Compatible with Pro2 PLUS & Pro2 Compact systems): 42.90€ - In Stock


Shipping Costs (Air Mail with tracking number)

Euro Zone and UK: 8.20€
Any country outside Euro Zone: 11.40€
(Combined shipping: up to, any 4 boards per packet)

Accepted Payment Methods: PayPal only


To order please send me a private message (PM) with details about type of boards and quantities.


3D printable boxes

There are available for free files to 3D printing several types of enclosures for the devices listed above. Please visit the WeatherDuino WiKi to get the download links.

Image bellow is an example of a box for the Pro2 PLUS receiver

[Image: pro2plus_case.jpg]]]>


To build an WeatherDuino Pro2 PLUS weather station, the minimal requirements are one receiver unit (RX), plus one transmitter unit (TX). The Pro2 PLUS system supports up to four TX units.
The Wireless Display units are optional, but a very useful add-on.


WeatherDuino Pro2 PLUS Receiver

WeatherDuino Pro2 PLUS RX v2.00
Board size: 99.06mm x 86.36mm

[Image: WeatherDuinoPro2Plus_RX_v200_RevA_rdm.jpg]

Board only: 16.90€ - In Stock - More than 10 units
Board supplied as pictured, with all SMD parts already assembled: 54.90€ - This version is no more available.

Parts List


WeatherDuino Pro2 Universal Transmitter
Industrially produced, double face high quality HASL free boards.


WeatherDuino Pro2 TX v3.13
Board size: 99.06mm x 59.36mm


[Image: WDPro2_TXv313_net.jpg]


PCB supplied as pictured: 11.90€ -  In Stock
Parts List



[Image: WirelessDisplay_4Pro_logo01.png]

Optional WiFi WeatherDuino Wireless Display Unit


WeatherDuino 4Pro WD v1.20_RevA


[Image: WeatherDuino_4Pro_WD_ESP8266_04_web.jpg]

Supplied fully assembled, including the TFT display

RF + WiFi Version (includes the RF receiver module and SMA connector): 47.90€ - In Stock
WiFi Version (Compatible with Pro2 PLUS & Pro2 Compact systems): 42.90€ - In Stock


Shipping Costs (Air Mail with tracking number)

Euro Zone and UK: 8.20€
Any country outside Euro Zone: 11.40€
(Combined shipping: up to, any 4 boards per packet)

Accepted Payment Methods: PayPal only


To order please send me a private message (PM) with details about type of boards and quantities.


3D printable boxes

There are available for free files to 3D printing several types of enclosures for the devices listed above. Please visit the WeatherDuino WiKi to get the download links.

Image bellow is an example of a box for the Pro2 PLUS receiver

[Image: pro2plus_case.jpg]]]> <![CDATA[WeatherDuino Pro2 TX v3.1x - Parts List]]> https://www.meteocercal.info/forum/Thread-WeatherDuino-Pro2-TX-v3-1x-Parts-List Thu, 03 Sep 2015 01:33:56 +0100 werk_ag]]> https://www.meteocercal.info/forum/Thread-WeatherDuino-Pro2-TX-v3-1x-Parts-List


WeatherDuino Pro2 TX Board v3.13

[Image: WDPro2_TXv313_net.jpg]

Parts List:
.pdf WeatherDuino_Pro2_TX_v313_PartsList.pdf Size: 468,86 KB  Downloads: 1115
- Last Update: 2020/11/09


WeatherDuino Pro2 TX Board v3.12

[Image: WDPro2_TXv312.jpg]

Parts List:
.pdf WeatherDuino_Pro2_TX_v312_PartsList.pdf Size: 437,18 KB  Downloads: 2080
]]>


WeatherDuino Pro2 TX Board v3.13

[Image: WDPro2_TXv313_net.jpg]

Parts List:
.pdf WeatherDuino_Pro2_TX_v313_PartsList.pdf Size: 468,86 KB  Downloads: 1115
- Last Update: 2020/11/09


WeatherDuino Pro2 TX Board v3.12

[Image: WDPro2_TXv312.jpg]

Parts List:
.pdf WeatherDuino_Pro2_TX_v312_PartsList.pdf Size: 437,18 KB  Downloads: 2080
]]>