Hello to all,
I have just purchased a WeatherDuino Pro2 Compact RX.
I edited the Config_Options.h and Credentials.h file with all my data.
Now I'm ready to recompile and upload the modified soft, but activating the "ESP8266 Sketch Data Upload" option in the Arduino IDE (to reload fonts and splash screens) I get the following error:
I checked the libraries, and the Arduino folders and everything seems ok.
What could be causing this error (esptool??)?
Thanks everyone for the help.
Alex
I have just purchased a WeatherDuino Pro2 Compact RX.
I edited the Config_Options.h and Credentials.h file with all my data.
Now I'm ready to recompile and upload the modified soft, but activating the "ESP8266 Sketch Data Upload" option in the Arduino IDE (to reload fonts and splash screens) I get the following error:
Code:
Arduino:1.8.11 (Windows 7), Scheda:"LOLIN(WEMOS) D1 R2 & mini, 80 MHz, Flash, Legacy (new can return nullptr), All SSL ciphers (most compatible), 4MB (FS:2MB OTA:~1019KB), v2 Lower Memory, Disabled, None, Only Sketch, 921600"
[SPIFFS] data : C:\Users\Alex\Documents\Arduino\software\RX software\WeatherDuino_P2ESP8266_RX_v3.1_b012\data
[SPIFFS] size : 2024
[SPIFFS] page : 256
[SPIFFS] block : 8192
/fonts/ArialBold11.vlw
/fonts/ArialBold11LEA.vlw
/fonts/NotoSansBold14.vlw
/fonts/NotoSansBold14LEA.vlw
/icon50/clear-day.bmp
/icon50/clear-night.bmp
/icon50/cloudy.bmp
/icon50/drizzle.bmp
/icon50/fog.bmp
/icon50/hail.bmp
/icon50/lightRain.bmp
/icon50/partly-cloudy-day.bmp
/icon50/partly-cloudy-night.bmp
/icon50/rain.bmp
/icon50/sleet.bmp
/icon50/snow.bmp
/icon50/thunderstorm.bmp
/icon50/unknown.bmp
/icon50/wind.bmp
/icons/home.bmp
/icons/home1.bmp
/icons/moisture.bmp
/icons/termometro.bmp
/icons/tree.bmp
/icons/tree1.bmp
/icons/WDicon.bmp
/splash/Pro2Compact_Splash.jpg
/splash/WDlogo.jpg
[SPIFFS] upload : C:\Users\Alex\AppData\Local\Temp\arduino_build_348323/WeatherDuino_P2ESP8266_RX_v3.1_b012.spiffs.bin
[SPIFFS] address : 0x200000
[SPIFFS] reset : --before default_reset --after hard_reset
[SPIFFS] port : COM17
[SPIFFS] speed : 921600
[SPIFFS] python : python.exe
[SPIFFS] uploader : C:\Users\Alex\AppData\Local\Arduino15\packages\esp8266\hardware\esp8266\2.6.3\tools\upload.py
usage: esptool [-h] [--chip {auto,esp8266,esp32}] [--port PORT] [--baud BAUD]
[--before {default_reset,no_reset,no_reset_no_sync}]
[--after {hard_reset,soft_reset,no_reset}] [--no-stub]
[--trace] [--override-vddsdio [{1.8V,1.9V,OFF}]]
{load_ram,dump_mem,read_mem,write_mem,write_flash,run,image_info,make_image,elf2image,read_mac,chip_id,flash_id,read_flash_status,write_flash_status,read_flash,verify_flash,erase_flash,erase_region,version}
...
esptool: error: unrecognized arguments: --end
SPIFFS Upload failed!
I checked the libraries, and the Arduino folders and everything seems ok.
What could be causing this error (esptool??)?
Thanks everyone for the help.
Alex