Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Compatible ?
#1

Hello,
Can I use my vantage pro cabled on you receiver ?
Olivier
Reply
#2

You can use the wind vane, anemometer, and rain gauge. The actual Davis console and electronics do not work. You will need a weatherduino TX and RX unit. You build the units, and plug in the wind vane / anemometer (After altering plug pins) , and rain gauge. You will need to buy an SHT 31 T/H sensor. 

But this is  great project and you can build up your old Davis into a fully wireless weather station.
Reply




Users browsing this thread: 1 Guest(s)