Meduino Mega 2560 Pro - Mini Pinout - Printable Version

+- WeatherDuino Forum (https://www.meteocercal.info/forum)
+-- Forum: Weather Stations - WeatherDuino Pro2 Line (https://www.meteocercal.info/forum/forum-4.html)
+--- Forum: Hardware Questions (https://www.meteocercal.info/forum/forum-11.html)
+--- Thread: Meduino Mega 2560 Pro - Mini Pinout (/thread-964.html)

---

Meduino Mega 2560 Pro - Mini Pinout - laulau - 23-12-2016

Hi,
Does anyone have the schematic or pinout of the Meduino board ?

Thanks

---

RE: Meduino Mega 2560 Pro - Mini Pinout - Zappie - 23-12-2016

(23-12-2016, 14:33)laulau Wrote:  Hi,
Does anyone have the schematic or pinout of the Meduino board ?

Thanks

Regards, Zappie

---

RE: Meduino Mega 2560 Pro - Mini Pinout - laulau - 04-01-2017

Hi,
I need more informations; which pin can be used as interrupt ?
I need a free one to decode Oregon RF sensors.
Thanks

---

RE: Meduino Mega 2560 Pro - Mini Pinout - werk_ag - 04-01-2017



You can use GPIO1 or GPIO2 on the Pro2 PLUS board.

GPIO1 - PIN2 - INT4
GPIO2 - PIN3 - INT5

It seems that the GPIO port of the Pro2 PLUS can be used for some more "exotic" purposes, than  simple I/O.
Coders and developers always will find some "less explained" features, to exercise their skills.

---

RE: Meduino Mega 2560 Pro - Mini Pinout - laulau - 16-06-2017

Hi,

After some testing i came to the conclusion that for GPIO1 it is int0 !

And it's confirmed on arduino web

   

---

RE: Meduino Mega 2560 Pro - Mini Pinout - werk_ag - 16-06-2017

Yes, that's right!

GPIO1 - PIN2 - INT0
GPIO2 - PIN3 - INT1

---