Doubt about C5,C6, and C9 in 3.11 TX - Printable Version
+- WeatherDuino Forum (https://www.meteocercal.info/forum)
+-- Forum: Weather Stations - WeatherDuino Pro2 Line (https://www.meteocercal.info/forum/Forum-Weather-Stations-WeatherDuino-Pro2-Line)
+--- Forum: Hardware Questions (https://www.meteocercal.info/forum/Forum-Hardware-Questions)
+--- Thread: Doubt about C5,C6, and C9 in 3.11 TX (/Thread-Doubt-about-C5-C6-and-C9-in-3-11-TX)
+- WeatherDuino Forum (https://www.meteocercal.info/forum)
+-- Forum: Weather Stations - WeatherDuino Pro2 Line (https://www.meteocercal.info/forum/Forum-Weather-Stations-WeatherDuino-Pro2-Line)
+--- Forum: Hardware Questions (https://www.meteocercal.info/forum/Forum-Hardware-Questions)
+--- Thread: Doubt about C5,C6, and C9 in 3.11 TX (/Thread-Doubt-about-C5-C6-and-C9-in-3-11-TX)
Doubt about C5,C6, and C9 in 3.11 TX - Wizza - 31-03-2016
Hi guys, Building 3.11 Tx. have a question re C5,C6, and C9. Schematic shows them as 100nF, but parts list shows C6,C9 different, at 47nF. How critical, and which value shall I install..? Thanks...
Mark R
RE: WeatherDuino Pro2 TX v3.1x - Parts List - werk_ag - 31-03-2016
Ops... Seems I have a discrepancy on the parts list. It was already corrected. Thanks Mark.
The value of C6 and C9 is not critical, it can be 47nF, but preferably use 100nF ceramic, as indicated in the schematics