TX board reset - Printable Version

TX board reset - Printable Version

+- WeatherDuino Forum (https://www.meteocercal.info/forum)
+-- Forum: Weather Stations - WeatherDuino Pro2 Line (https://www.meteocercal.info/forum/forum-4.html)
+--- Forum: General Talking (https://www.meteocercal.info/forum/forum-23.html)
+--- Thread: TX board reset (/thread-432.html)

TX board reset - laulau - 13-12-2015

Hi,
Is there a way to reset the eeprom of the TX board to clear false rain reading ?

RE: TX board reset - werk_ag - 13-12-2015

Not directly, but you can use this small sketch, and then program the TX unit again

Code:
#include <EEPROM.h>

void setup() {
  EEPROM.write(12, 0x00);
}

void loop() {

}

Anyway, normally is not necessary clearing the eeprom on the TX unit. Just do a "factory reset" pressing the push button for 5 seconds on the RX unit, and it should initialize properly no matter how many rain tips are already recorded on the TX eeprom.

RE: TX board reset - laulau - 13-12-2015

Ok,
Thanks