WeatherDuino WirelessDisplay "SanoBox" - Printable Version

+- WeatherDuino Forum (https://www.meteocercal.info/forum)
+-- Forum: Weather Equipment - General Discussion (https://www.meteocercal.info/forum/Forum-Weather-Equipment-General-Discussion)
+--- Forum: Weather Equipment (https://www.meteocercal.info/forum/Forum-Weather-Equipment)
+--- Thread: WeatherDuino WirelessDisplay "SanoBox" (/Thread-WeatherDuino-WirelessDisplay-SanoBox)

---

WeatherDuino WirelessDisplay "SanoBox" - sano2 - 08-01-2023

Hello everyone,

Here is my case or box for Wireless Display with UPS with some decorations




Powered with USB -> 5,5x2,1 DC Jack (Standard USB charger for old phone), UPS with 18650 Li-Ion battery. 

Have a nice day 

Sano

---

RE: WeatherDuino WirelessDisplay "SanoBox" - hornychz - 08-01-2023

---

RE: WeatherDuino WirelessDisplay "SanoBox" - sano2 - 08-01-2023

---

RE: WeatherDuino WirelessDisplay "SanoBox" - Nigel - 10-01-2023

That is a delight to behold
 

(08-01-2023, 10:29)sano2 Wrote:  Hello everyone,

Here is my case or box for Wireless Display with UPS with some decorations




Powered with USB -> 5,5x2,1 DC Jack (Standard USB charger for old phone), UPS with 18650 Li-Ion battery. 

Have a nice day 

Sano

---

RE: WeatherDuino WirelessDisplay "SanoBox" - werk_ag - 12-01-2023

(10-01-2023, 16:16)Nigel Wrote:  That is a delight to behold
 

Fully agree!
Quite a creative design.

---

RE: WeatherDuino WirelessDisplay "SanoBox" - sano2 - 13-01-2023

Thanks

I am fascinated with lithophane, 3D print and weatherduino  

---

RE: WeatherDuino WirelessDisplay "SanoBox" - Nmweather - 27-01-2023

Very nice case! I've been looking for a ups, which one did you use? I would like to be able to put a raspberry pi, the receiver, and a ups in a case together, although our mains power rarely goes out it would be nice to have the system working when it does.

Thanks,

Zac

---

RE: WeatherDuino WirelessDisplay "SanoBox" - sano2 - 01-02-2023

Hello Zac,

I have got many UPS boards, in this case I used this one:

https://www.aliexpress.com/item/4001105131401.html?spm=a2g0o.order_list.order_list_main.19.21ef1802L0kPRv

I recommended this product. Out 12V, you must use DC to DC step down module from 12V to ... 5V or other. For this I was using this DC Step Down converter: 
https://www.aliexpress.com/item/1005003595596018.html?spm=a2g0o.order_list.order_list_main.40.21ef1802L0kPRv
It is adjustable 

The idea is very simple, when you need to move the display to another socket, it does not turn off and lasts for a while.

I will upgrade design, DC connector replace to this:

https://www.aliexpress.com/item/1005004211736499.html?spm=a2g0o.order_list.order_list_main.77.c9c21802Lcj1Gt

Sano

---

RE: WeatherDuino WirelessDisplay "SanoBox" - werk_ag - 05-02-2023

(01-02-2023, 17:04)sano2 Wrote:  Hello Zac,

I have got many UPS boards, in this case I used this one:

https://www.aliexpress.com/item/4001105131401.html?spm=a2g0o.order_list.order_list_main.19.21ef1802L0kPRv

This small UPS with 5V output is also suitable to use with the 4Pro Dual Band receivers. I'm using them on my units for more than a year, without any issue.

---

RE: WeatherDuino WirelessDisplay "SanoBox" - uncle_bob - 08-02-2023

That's very cool!

---