Compatible ? - Printable Version

+- WeatherDuino Forum (https://www.meteocercal.info/forum)
+-- Forum: Weather Stations - WeatherDuino Pro2 Line (https://www.meteocercal.info/forum/Forum-Weather-Stations-WeatherDuino-Pro2-Line)
+--- Forum: General Talking (https://www.meteocercal.info/forum/Forum-General-Talking)
+--- Thread: Compatible ? (/Thread-Compatible)

---

Compatible ? - osegouin - 16-05-2020

Hello,
Can I use my vantage pro cabled on you receiver ?
Olivier

---

RE: Compatible ? - JT118 - 17-05-2020

You can use the wind vane, anemometer, and rain gauge. The actual Davis console and electronics do not work. You will need a weatherduino TX and RX unit. You build the units, and plug in the wind vane / anemometer (After altering plug pins) , and rain gauge. You will need to buy an SHT 31 T/H sensor. 

But this is  great project and you can build up your old Davis into a fully wireless weather station.

---