How to connect a color TFT display to WeatherDuino Pro2 (boards v4.0x) - Printable Version

+- WeatherDuino Forum (https://www.meteocercal.info/forum)
+-- Forum: Weather Stations - WeatherDuino Pro2 Line (https://www.meteocercal.info/forum/Forum-Weather-Stations-WeatherDuino-Pro2-Line)
+--- Forum: Hardware Questions (https://www.meteocercal.info/forum/Forum-Hardware-Questions)
+--- Thread: How to connect a color TFT display to WeatherDuino Pro2 (boards v4.0x) (/Thread-How-to-connect-a-color-TFT-display-to-WeatherDuino-Pro2-boards-v4-0x)

---

How to connect a color TFT display to WeatherDuino Pro2 (boards v4.0x) - werk_ag - 31-12-2014




Board ---------> TFT
SCLK ---> SCK
MOSI ---> SDA
CS ---> CS
RST ---> RESET
DC ---> A0
5V ---> VCC
GND ---> GND
LED+ ---> LED+
LED- ---> LED-


Hint: On the RX pcb solder a row of 10 pin headers, then use 9 Dupond female to female wires to connect pcb pin headers to TFT pin headers. And that's it, in less than a minute TFT is connected.

---

RE: How to connect a color TFT display to WeatherDuino Pro2 (boards v4.0x) - Live_Steam_Mad - 02-01-2015

Thanks for the guide. I had some questions about it which I wrote and got replies for ;- http://www.meteocercal.info/forum/Thread-Here-s-my-1st-attempt-at-WDPro2?pid=760#pid760 , I should have put them here but at least the info is available to all now.

Regards,

Alistair G.

---