[HINT] Before starting Cumulus, wait... - Printable Version

+- WeatherDuino Forum (https://www.meteocercal.info/forum)
+-- Forum: Weather Stations - WeatherDuino Pro2 Line (https://www.meteocercal.info/forum/forum-4.html)
+--- Forum: General Talking (https://www.meteocercal.info/forum/forum-23.html)
+--- Thread: [HINT] Before starting Cumulus, wait... (/thread-113.html)

---

[HINT] Before starting Cumulus, wait... - werk_ag - 12-10-2014

To prevent foreign values ​​are passed to Cumulus, after each reboot of the WeatherDuino Pro2 receiver, always wait 2-3 minutes before starting Cumulus. This procedure is necessary to allow time for the receiver to get data from all sensors and do some internal checkings.

Avoid update the RX unit software, while it is raining. In some circumstances this can lead to be later reported to Cumulus erroneous data on rain.

---

IMPORTANT: To prevent Arduino auto-reset when Cumulus starts, make sure VP1 is closed before starting Cumulus .
For programing VP1 must be open.

---

RE: [HINT] Before starting Cumulus, wait... - werk_ag - 10-02-2015

UPDATE: On last software release, if you try to start Cumulus before waiting at least 2 minutes after a system restart, connection will fail.

---