WeatherDuino Forum

WeatherDuino Forum > Weather Stations - WeatherDuino Pro2 Line > Hardware Questions > Doubt about C5,C6, and C9 in 3.11 TX
Full Version: Doubt about C5,C6, and C9 in 3.11 TX
You're currently viewing a stripped down version of our content. View the full version with proper formatting.

Wizza

31-03-2016, 13:20
Hi guys, Building 3.11 Tx. have a question re C5,C6, and C9. Schematic shows them as 100nF, but parts list shows C6,C9 different, at 47nF. How critical, and which value shall I install..? Thanks...

Mark R

werk_ag

31-03-2016, 22:19
Ops... Seems I have a discrepancy on the parts list. It was already corrected. Thanks Mark.
The value of C6 and C9 is not critical, it can be 47nF, but preferably use 100nF ceramic, as indicated in the schematics
WeatherDuino Forum > Weather Stations - WeatherDuino Pro2 Line > Hardware Questions > Doubt about C5,C6, and C9 in 3.11 TX