18-10-2015, 19:20
18-10-2015, 22:39
(18-10-2015, 19:20)jomimota Wrote: [ -> ]Hi,
What's the best / correct values or the values you use in Cumulus Spike Removal?
Thanks in Advance.
Jorge Mota
Hi Jorge,
I believe spike removal isn't necessary any more (well I haven't noticed any since decommissioning my Fine Offset TX and console units). Werk_AG might be able to confirm this.
I've still got the old setting in the Calibration section of Cumulus 1 though and they are:
Temp 10c
Wind Gust 23 m/s
Wind SPeed 25m/s
Humidity 10%
Pressure 100mb
Mac Rain rate 200mm/hr
Max hourly rain 100mm