WeatherDuino Forum

Hello!

My Cumulus log entry contains the following lines:



2023-07-26 12:12:16.661 SendLoopCommand: Starting - LOOP 50
2023-07-26 12:12:16.662 SendLoopCommand: Sending command - LOOP 50, attempt 1
2023-07-26 12:12:16.662 SendLoopCommand: Wait for ACK
2023-07-26 12:12:16.662 WaitForACK: Starting
2023-07-26 12:12:16.677 WaitForACK: Discarding CR or LF - 0A
2023-07-26 12:12:16.677 WaitForACK: Discarding CR or LF - 0D
2023-07-26 12:12:16.695 WaitForACK: ACK received
2023-07-26 12:12:16.746 LOOP: Data - 1: 4C-4F-4F-FF-00-00-00-96-74-06-03-22-A0-02-01-01-87-00-7A-7A-A5-9D-A9-7A-9D-7A-7A-7A-7A-7A-7A-7A-7A-16-FF-FF-2B-32-21-FF-32-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-0A-02-00-00-00-00-00-00-0A-0D-C8-46
2023-07-26 12:12:16.746 LOOP: 1 - Data packet is good


I would be interested to know from whom (CumulusMX, 4Pro via RF or WifiSensors or other?) the data is requested.


greetings

(26-07-2023, 13:29)Sun_Dancer Wrote: [ -> ]...
I would be interested to know from whom (CumulusMX, 4Pro via RF or WifiSensors or other?) the data is requested.
...

Hi,

That is a complex subject to explain in a post.
Please refer to Davis Vantage Serial Protocol documentation, you can find it here: https://cdn.shopify.com/s/files/1/0515/5...1614399559

Not always all packets within a LOOP request are received by Cumulus, not worry with that, data packets are repeated more or less every 2 seconds.

aaaaaaaaaah! So these are queries coming from Cumulus?!

(26-07-2023, 22:05)Sun_Dancer Wrote: [ -> ]aaaaaaaaaah! So these are queries coming from Cumulus?!

Yes.