WeatherDuino Forum

Full Version: Compatible ?
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Hello,
Can I use my vantage pro cabled on you receiver ?
Olivier
You can use the wind vane, anemometer, and rain gauge. The actual Davis console and electronics do not work. You will need a weatherduino TX and RX unit. You build the units, and plug in the wind vane / anemometer (After altering plug pins) , and rain gauge. You will need to buy an SHT 31 T/H sensor. 

But this is  great project and you can build up your old Davis into a fully wireless weather station.