WeatherDuino Forum

(03-02-2019, 08:49)JT118 Wrote: [ -> ]

(03-02-2019, 08:37)philipgm Wrote: [ -> ]

(03-02-2019, 05:02)Werk_AG Wrote: [ -> ]

(02-02-2019, 07:12)JT118 Wrote: [ -> ]Weather Display does work with Weatherduino ...

During my tests with Weather Display, I only found a difficulty: I haven't found a way to use a multiplier for the rain data, so it only gives correct rain readings when used with a rain gauge which have 0.2mm per tip.
However, may there is a way that I hasn't managed to found.

I think the setting could be done on the:
'Universal Setup' page. On the 'Rainfall Setup' area.
Just on the left in the Rain Offset area.
In the second box, I think you could put 1.4 for the Fine Offset rain gauge.
I haven't tried it but I think that would work.
Cheers 
Philip

We must have been posting at the same time !