22-10-2018, 15:46
23-10-2018, 00:26
(22-10-2018, 15:46)Xroads Wrote: [ -> ]Hello.
Is there a mechanical drawing available for the pro2 Compact, or do I have to make one myself![]()
Regds.
Max
Hi Max,
I'm afraid that isn't available. Writing documentation isn't my strong point.
Would be nice if you could do it.
Regards
23-10-2018, 21:58
(23-10-2018, 00:26)Werk_AG Wrote: [ -> ]Hi Max,
I'm afraid that isn't available. Writing documentation isn't my strong point.Would be nice if you could do it.
![]()
Regards
Ok
I'll see what I can do
Regds.
23-10-2018, 22:37
Is it about such a thing?
![[Image: 28b46013c5b0.jpg]](https://naforum.zapodaj.net/images/28b46013c5b0.jpg)
In a few days you will be ready.
![[Image: 28b46013c5b0.jpg]](https://naforum.zapodaj.net/images/28b46013c5b0.jpg)
In a few days you will be ready.
24-10-2018, 17:43
(23-10-2018, 22:37)jarekh3 Wrote: [ -> ]Is it about such a thing?Jarekh you are my hero
In a few days you will be ready.
Regards.
24-10-2018, 20:28

If anyone needs a .dxf file, please send me a PM.
![[Image: bd55e0d7a5c5.jpg]](https://naforum.zapodaj.net/images/bd55e0d7a5c5.jpg)
Stl is here:
https://www.thingiverse.com/thing:3175181
28-10-2018, 05:44
Werk,
Re the Compact Rx,I notice from "jarekh3's drawing there is a RTC module on the rear of the unit. As i was looking at ordering one and installing it in a very compact enclosure (befitting its size) and this would prevent it from fitting, is it absolutely necessary or could I just rely on the ntp server for date and time?
I note that the BME280 is also there and i wonder the accuracy of the temp/RH readings inside an enclosure.
Regards
Jim
Re the Compact Rx,I notice from "jarekh3's drawing there is a RTC module on the rear of the unit. As i was looking at ordering one and installing it in a very compact enclosure (befitting its size) and this would prevent it from fitting, is it absolutely necessary or could I just rely on the ntp server for date and time?
I note that the BME280 is also there and i wonder the accuracy of the temp/RH readings inside an enclosure.
Regards
Jim
30-10-2018, 03:50
(28-10-2018, 05:44)Barrow4491 Wrote: [ -> ]Werk,
Re the Compact Rx,I notice from "jarekh3's drawing there is a RTC module on the rear of the unit. As i was looking at ordering one and installing it in a very compact enclosure (befitting its size) and this would prevent it from fitting, is it absolutely necessary or could I just rely on the ntp server for date and time?
I note that the BME280 is also there and i wonder the accuracy of the temp/RH readings inside an enclosure.
Regards
Jim
Hi Jim,
The hardware RTC its important (unless the software is modified is must be installed). It covers the possibly that you may have the restart the unit in a moment that there is no Internet connection (for any possible reason).