Apogee SP-110 installed today
Data on my live site, will continue to be from the "solar cell" pyranometer, as it is working well since almost 3 years. I will be using this one just for comparisons.
Just by curiosity, my solar panel (50W monocrystalline) and the battery (12V - 14 A/hr):
(18-11-2017, 20:35)Werk_AG Wrote: [ -> ]Apogee SP-110 installed today
Data on my live site, will continue to be from the "solar cell" pyranometer, as it is working well since almost 3 years. I will be using this one just for comparisons.
Just by curiosity, my solar panel (50W monocrystalline) and the battery (12V - 14 A/hr):
Simply perfect! Good work.
(18-11-2017, 23:46)hornychz Wrote: [ -> ] (18-11-2017, 20:35)Werk_AG Wrote: [ -> ]Apogee SP-110 installed today
Data on my live site, will continue to be from the "solar cell" pyranometer, as it is working well since almost 3 years. I will be using this one just for comparisons.
Just by curiosity, my solar panel (50W monocrystalline) and the battery (12V - 14 A/hr):
Simply perfect! Good work.
Thank you. Surely you noted that, as we talked in another topic, antenna is at horizontal position.
(19-11-2017, 04:13)Werk_AG Wrote: [ -> ] (18-11-2017, 23:46)hornychz Wrote: [ -> ] (18-11-2017, 20:35)Werk_AG Wrote: [ -> ]Apogee SP-110 installed today
Data on my live site, will continue to be from the "solar cell" pyranometer, as it is working well since almost 3 years. I will be using this one just for comparisons.
Just by curiosity, my solar panel (50W monocrystalline) and the battery (12V - 14 A/hr):
Simply perfect! Good work.
Thank you. Surely you noted that, as we talked in another topic, antenna is at horizontal position.
Yes of course ...
(My original field, which I also studied at college, is radio engineering. So now I'm happy if I can use anything.
)
Bravo Werk! Looks great ! i remember those pictures (with no Apogee) when I started the project - i still want at some point have a solar panel and inviter to power my sensors. Maybe one day
(20-11-2017, 13:27)zitoune Wrote: [ -> ]Bravo Werk! Looks great ! i remember those pictures (with no Apogee) when I started the project - i still want at some point have a solar panel and inviter to power my sensors. Maybe one day
Werk,
I managed to get ode of the Apogee SP110 sensors and have installed it today but am not getting any reading on my Rx.
I have checked it's output and it measures 170 mv with sun overhead and a cloudless sky. What output should i expect at A0 A1?
regards
JIm
(23-11-2017, 04:41)Barrow4491 Wrote: [ -> ] (20-11-2017, 13:27)zitoune Wrote: [ -> ]Bravo Werk! Looks great ! i remember those pictures (with no Apogee) when I started the project - i still want at some point have a solar panel and inviter to power my sensors. Maybe one day
Werk,
I managed to get ode of the Apogee SP110 sensors and have installed it today but am not getting any reading on my Rx.
I have checked it's output and it measures 170 mv with sun overhead and a cloudless sky. What output should i expect at A0 A1?
regards
JIm
Hi Jim,
Do you have the Solar / UV interface?
(23-11-2017, 05:01)Werk_AG Wrote: [ -> ] (23-11-2017, 04:41)Barrow4491 Wrote: [ -> ] (20-11-2017, 13:27)zitoune Wrote: [ -> ]Bravo Werk! Looks great ! i remember those pictures (with no Apogee) when I started the project - i still want at some point have a solar panel and inviter to power my sensors. Maybe one day
Werk,
I managed to get ode of the Apogee SP110 sensors and have installed it today but am not getting any reading on my Rx.
I have checked it's output and it measures 170 mv with sun overhead and a cloudless sky. What output should i expect at A0 A1?
regards
JIm
Hi Jim,
Do you have the Solar / UV interface?
Werk,
Yes I do, i bought the kit a couple of years ago
Before anything else, please check your user configurable settings on both TX and RX software.
TX
Code:
// --------------------------------------------------------------------------------------
// Define which data this unit will send. 0 = Not send this data, 1= Send this data
// --------------------------------------------------------------------------------------
...
#define ID4 1 // SolRad / UV data
...
RX
Suposing Solar/UV interface is connected to TX unit0
Code:
// --------------------------------------------------------------------------------------
// Define the source of your main outside sensors
// --------------------------------------------------------------------------------------
...
// ---- Define the source of your main Solar / UV sensores
#define SRUV_OutUnit 0 // 0= Solar Rad / UV sensors connected to TX_Unit 0, 1= for TX_Unit1, ..., 9 for not used
// ---- Define type of Solar Radiation / UV Sensors
// ---- Support for sensor type 4 its experimental (type 4 its a PAR sensor)
#define Solar_Sensor 2 // 0 not used, 1= Solar Cell "Pyranometer", 2= Apogee SP-110 Pyranometer, 3= Reserved, 4= Apogee SQ-110: Photosynthetically Active Radiation Sensor
...