Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

AQM III indoor Case for SPS30 and PMS7003
#1

Hello weather frogs!

This is a 2-part indoor housing for the WeatherDuino Air Quality Monitor III with Sensorion SPS30 or Plantower PMS7003 for particle measurement, MH-Z19 for Co2 measurement and 1.3 inch OLED.
The AQM board is attached between the two halves of the housing with 4 M3x10 screws.

You can find the case for the Sensirion Sensor and further information on my Thingiverse profile

https://www.thingiverse.com/thing:4967779

you can find the Plantower version here:
https://www.thingiverse.com/thing:4974448

If you like it, please leave a like, thanks.


Attached Files Image(s)
           

WeatherDuino 4Pro, Auriol HT13726 Rain Gauge, Davis wind vane / anemometer, UV / solar module​​​​​​​ + Millenium Falcon
PWS ILEIPZ27
Reply
#2

Nice work mate.

(18-09-2021, 04:11)Sun_Dancer Wrote:  Hello weather frogs!

This is a 2-part indoor housing for the WeatherDuino Air Quality Monitor III with Sensorion SPS30 for particle measurement, MH-Z19 for Co2 measurement and 1.3 inch OLED.
The AQM board is attached between the two halves of the housing with 4 M3x10 screws.

You can find the case and further information on my Thingiverse profile

https://www.thingiverse.com/thing:4967779

If you like it, please leave a like, thanks.
Reply




Users browsing this thread: 1 Guest(s)